Introduction of machine

Kings M50E is a new generation of metal 3D printers specially developed by Kings 3D for the vocational education industry, moulding small parts with zero and high precision. It is very suitable for low-cost education and training work, providing complete metal 3D printing operations and skills training for students and vocational trainees. The main features are:

1)Work without protective gas;

2) High precision and strong stability;

3) Dual circulation wind site protection system;

4) High security Multiple safety insurance.

Environment of setting-up

1) The equipment room needs to be kept dry and ventilated, and an exhaust system should be installed to promptly remove inert gas.
2) The main equipment area requires more than 35 square meters, with the sides and back of the equipment being more than 1 meter away from the wall.
3) A dedicated air conditioner should be installed in the room to maintain the ambient temperature of the equipment at around 25℃ and the humidity below 75%.
For specific requirements, please refer to the PDF document.
SLM Information\各机型售前资料-PDF\JS-SLM-50E\3-设备环境要求指南-50E.pdf

Operating instructions

After the data preparation is completed, personnel and materials need to be checked first: 1) Substrate installation; 2) Squeegee inspection; 3) Powder loading. Secondly, equipment preparation before printing is required: 1) Start the equipment; 2) Return each axis to the origin; 3) Level the substrate; 4) Spread the first layer of metal powder (ensuring even distribution on the substrate); 5) Clean the protective lens; 6) Deoxygenize (filling protective gas to avoid metal being oxidized) and achieve internal circulation; 7) Configure process package. Then, the printing can be started until the parts are retrieved.
For specific requirements, please refer to the PDF document.
SLM Information\各机型售前资料-PDF\JS-SLM-50E\1-用户手册-50E.pdf
p.70页,7.3 设备操作流程

Maintenance

Software

Kings self-R&D software